Product Guide Model O 2 Wireless
PRODUCT GUIDE
Model O 2 Wireless
Product Guide Sections
Getting Started Set-Up Software Mouse Layout Default DPI Levels Lighting Effects Battery Product Specs Reset to Factory Default Additional Links Support Warranty Product RegistrationGetting Started
Set-Up
What's in the Box?
• 1× Glorious Model O 2 Wireless Gaming Mouse
• 1× USB-A to USB-C Ascended Charging Cable
• 1× 2.4GHz Wireless Receiver USB
• 1× USB-A to USB-C Adapter
Glorious mice come with blue protective film on the G-Skates mouse feet in order to protect them. Ensure you remove these coverings before use.
Plug & Play
We recommend fully charging your Model O 2 Wireless before using it for the first time in wireless mode. The mouse can be used normally in wired mode. Total charge time from zero to full battery is approximately 2 hours.
Plug the USB-A end of the Ascended cord into your PC and the USB-C end into the USB-C port located on the front of the mouse, hex symbol up. The mouse will automatically install all necessary drivers.
Wireless USB Receiver
Once the mouse is fully charged, toggle the switch on the bottom of the mouse to "2.4" and plug the USB Receiver into any available USB port on your PC. It is paired with the mouse out of the box and should be kept at close range for optimal performance.
Wireless Bluetooth
Once the mouse is fully charged, toggle the switch at the bottom of the mouse to “BT.” Press and hold the DPI button and both side buttons until the LEDs flash blue to indicate that the mouse is discoverable. The mouse will show as “Model O 2” on your PC. Follow the instructions on your PC to successfully pair the mouse via Bluetooth. Once successfully paired, the mouse will discontinue flashing blue and revert to its previous lighting effect.
Bluetooth connectivity requires a PC with built-in Bluetooth or an external Bluetooth adapter (purchased elsewhere).
System Requirements
• Available USB port
• Windows 7+, MacOS, Linux
Software
Glorious CORE
Instructions for downloading Glorious CORE are available at the link below. This software is not required to use the mouse, but is needed to unlock a fully customizable experience - create custom macros, rebind mouse functions, unlock the full RGB color palette, and save personalized DPI settings.
(Windows OS only)
Mouse Layout
The Model O 2 Wireless is a symmetric mouse with six buttons, including a pressable scroll wheel and two side buttons.
Default DPI Levels
The DPI Indicator on the bottom of the mouse will show a color to reflect which DPI level is currently active. Cycle through DPI levels by pressing the DPI Button located behind the scroll wheel.
DPI values, the default DPI level, and the colors used to indicate levels can be customized in Glorious CORE software
400 DPI
Yellow
800 DPI
Blue
1600 DPI (Default)
Red
3200 DPI
Green
400 DPI
Yellow
800 DPI
Blue
1600 DPI (Default)
Red
3200 DPI
Green
Lighting Effects
The Model O 2 Wireless has built-in LED effects that can be changed using the button combinations below. More RGB options are available in Glorious CORE.
Button Combinations
Change Lighting Effect
Middle + Forward + DPI
Adjust Brightness
Middle + DPI + Right Mouse Button
Adjust Speed
Middle + DPI + Back
Change Color
Middle + DPI + Left Mouse Button
Change Lighting Effect
Middle + Forward + DPI
Adjust Brightness
Middle + DPI + Right Mouse Button
Adjust Speed
Middle + DPI + Back
Change Color
Middle + DPI + Left Mouse Button
Lighting Effects
Glorious Mode (Default)
5 Brightness Levels;
3 Speeds
Seamless Breathing (RGB)
5 Brightness Levels;
3 Speeds
Breathing (RGB)
5 Brightness Levels;
3 Speeds
Single Color
5 Brightness Levels;
No Speed;
7 Colors
Breathing (Single Color)
5 Brightness Levels;
3 Speeds;
7 Colors
Tail
5 Brightness Levels;
3 Speeds
Rave
5 Brightness Levels;
3 Speeds
Wave
5 Brightness Levels;
3 Speeds
LEDs Off
(LEDs Turn Off)
Glorious Mode (Default)
5 Brightness Levels;
3 Speeds
Seamless Breathing (RGB)
5 Brightness Levels;
3 Speeds
Breathing (RGB)
5 Brightness Levels;
3 Speeds
Single Color
5 Brightness Levels;
No Speed;
7 Colors
Breathing (Single Color)
5 Brightness Levels;
3 Speeds;
7 Colors
Tail
5 Brightness Levels;
3 Speeds
Rave
5 Brightness Levels;
3 Speeds
Wave
5 Brightness Levels;
3 Speeds
LEDs Off
(LEDs Turn Off)
Battery
When the Model O 2 Wireless is low on power, the LEDs will shut off, except for one LED in the left strip, which will blink red to indicate that the mouse should be plugged in to charge.
The battery level can be checked in wireless mode by pressing and holding the DPI button. The RGB strips will blink in the color corresponding to the battery level. This can be disabled by pressing and holding the DPI button again. Battery level can also be found in the Glorious CORE software.
0-25% Battery
Red LEDs
26-60% Battery
Orange LEDs
61-90% Battery
Yellow LEDs
91-100% Battery
Green LEDs
0-25% Battery
Red LEDs
26-60% Battery
Orange LEDs
61-90% Battery
Yellow LEDs
91-100% Battery
Green LEDs
Note that the battery life of the mouse is negatively impacted by the brightness of the lighting. The brightness can be adjusted via the button combination described above in Lighting Effects or through Glorious CORE.
Product Specs
Model O 2 Wireless
Weight
68g ± 3g
Sensor
Glorious BAMF 2.0 Optical Sensor
Switch Type (Main Buttons)
Glorious Switches
Rated for 80 Million Clicks
Number of Buttons
6
Max Tracking Speed
650 IPS
Acceleration
50G
Max DPI
26,000
Max Polling Rate
1000Hz (1ms) (Default)
Lift Off Distance
1-2 mm (Adjustable with Software)
1 mm Default
Debounce Time
4-16 ms (Adjustable with Software)
10 ms Default
Connection
USB 2.0;
2.4GHz Wireless;
Bluetooth® 5.2 LE
Battery Life
110 Hours (2.4GHz);
210 Hours (Bluetooth 5.2 LE)
**RGB Off
Weight
68g ± 3g
Sensor
Glorious BAMF 2.0 Optical Sensor
Switch Type (Main Buttons)
Glorious Switches
Rated for 80 Million Clicks
Number of Buttons
6
Max Tracking Speed
650 IPS
Acceleration
50G
Max DPI
26,000
Max Polling Rate
1000Hz (1ms) (Default)
Lift Off Distance
1-2 mm (Adjustable with Software)
1 mm Default
Debounce Time
4-16 ms (Adjustable with Software)
10 ms Default
Connection
USB 2.0;
2.4GHz Wireless;
Bluetooth® 5.2 LE
Battery Life
110 Hours (2.4GHz);
210 Hours (Bluetooth 5.2 LE)
**RGB Off
Reset to Factory Default
The Model O 2 Wireless can be restored to factory settings by pressing and holding the left, right, and scroll click buttons for 5 seconds. The LEDs will flash green to indicate that the settings are being reset.
This action will erase all custom profile information from the mouse.
Additional Links
Support
Questions or concerns regarding your Glorious mouse can be directed to our support team.
Warranty
Important Notices
• 2-year limited manufacturer warranty
• Warranty does not cover damages resulting from opening the mouse.
• Keep out of reach of children below the age of 10.
Product Registration
Registering your product extends the warranty by an additional year (free of charge) on eligible devices. To be eligible, register your device within 365 days of date of purchase.